Disclaimer: This post includes affiliate links

If you click on a link and make a purchase, I may receive a commission at no extra cost to you.

Initiating Pairing Process: Amazon Echo Dot User Manual

What to Know

• In the Alexa app, tapDevices >Plus (+ ) >Add Device >Amazon Echo >Echo, Echo Dot, Echo Plus, and More .
• Turn on your Echo Dot, wait for the blue light ring to turn orange, then tapYes in the Alexa app and follow the instructions to complete setup.
• If your Echo doesn’t enter setup mode automatically, you should reset your Echo device to restore it to factory settings.

This article explains how to put an Echo Dot in setup mode. Instructions apply to all models, including the 4th generation Amazon Echo Dot.

Amazon

How Do I Put My Echo Dot in Setup Mode?

Before you set up your Echo Dot, you need to download the Alexa app on your iOS or Android device. With the Echo turned off, open the Alexa app on your phone and follow these steps:

1. TapDevices at the bottom of the Alexa app.
2. Tap thePlus (+ ) in the upper-right corner.
3. TapAdd Device .
   
4. TapAmazon Echo .

5. TapEcho, Echo Dot, Echo Plus, and More .
6. Connect your Echo Dot to the power supply, turn it on, and then wait for the blue light ring to turn orange. It should take about 30 seconds.
7. TapYes in the Alexa app.
   
8. Tap yourEcho Dot under Available Devices.

9. Choose your Wi-Fi network, then tapContinue .
   
10. Continue following the prompts in the app to finish setting up your device. SelectSkip when the option appears to configure these settings later.

What Is Echo Dot Setup Mode?

The first time it powers on, your Echo device will automatically enter setup mode. In setup mode, the Echo Dot connects to the Alexa app on your phone via Bluetooth. Once connected, you must connect your Dot to your Wi-Fi network. Your Echo Dot will not work without a Wi-Fi connection.

You can tell your Echo is in setup mode when the ring of light turns from blue to orange. Once you’ve set up your Echo Dot, you can start using Alexa voice commands andAlexa skills .

Why Won’t My Echo Dot Go Into Setup Mode?

If someone else previously owned your Echo, they likely already set it up. You’ll still want to connect the device to your Alexa app, so you have complete control over its many functions.Reset your Echo device to restore it to factory settings, then follow the instructions above to set it up. The steps for resetting your Echo Dot are different depending on your device’s generation.

FAQ

• How long will the Echo Dot be in setup mode?
  It might take some time for your Echo Dot to enter startup mode, but it will remain in this mode and glowing orange as long as it takes to pair with your smartphone successfully through the Alexa app. If the orange light disappears while you’re still trying to connect the device, press and hold the action button to return it to setup mode.
• How do I get my Echo Dot out of setup mode?
  Your device will automatically exit setup mode once you’ve added it to your Wi-Fi network from the Alexa app. If it seems stuck trying to get into setup mode and the spinning blue light never turns orange, restart your Echo Dot by unplugging it and plugging it back in.

Was this page helpful?

Thanks for letting us know!

Get the Latest Tech News Delivered Every Day

Subscribe

Tell us why!

Other Not enough details Hard to understand

Submit

Also read: